TPD-8R-C
Heavy-Duty Degreaser and Industrial Cleaner
Product Advantages
- Non-Toxic
- Biodegradable
- No Ozone Depletion Potential(OOP)
- Low Volatile Organic Compounds (VOCs)
- No Flash Point
- Exceptional Cleaning Performance
- Rinses Easilywith Water
- Saves Energy – Effective Performance at Ambient Temperature and Minimal Agitation
- Wide Material Compatibility
- Cost Effective – Highly Dilatable and Recyclable
- No Special Storage or Handling Requirements
- Contains no Reportable Quantities of any Hazardous Components asDefined in 29 CFR 1910.1200 (TFA Note: this spec to be reviewed)
Developed for heavy-duty cleaning of hard surfaces
TPD-8R-C is a unique water-based blend of surfactants and co-solvents developed for heavy- duty cleaning of hard surfaces. It is designed to replace chlorinated, petroleum distillate, terpene-based and hydrocarbon/surfactant blend solvents widely used in the automotive, marine, aviation, and metal fabrication/cleaning industries for both commercial and military applications. TPD-8R-C solvates heavy lubricants and greases and dissolves baked-on carbon deposits like a solvent, without the associated environmental and safety hazards.
Product Applications Summary:
- All automotive surfaces and uses (including semis, trailers, etc.; for all external
surfaces and engine spaces) - All automotive combustion and exhaust surfaces (including heavy, baked-on soot and carbon deposits, etc.)
- All marine, industrial, and commercial surfaces and uses
- All aviation surfaces and uses
- All aviation combustion and exhaust surfaces (including all cowlings, etc.)
- All internal and external metal surfaces, including for tank spaces (including
- suppression of volatile compounds, etc.)
- All structural surfaces (including concrete, building exteriors, auto racetracks, airport runways, etc.)
Product Performance Features
- Environmentally friendly, non-toxic, biodegradable
- Extremely effective, broad-spectrum universal cleaner for all hard surfaces
- Industry leading economic performance, with lowest per unit cost-of-application
Product should NOT be used on automobiles with waxed surfaces, as it is likely to strip-out the wax.
Physical Properties
Color: Pale Yellow
Odor: Mild
pH: (Neat) 11.5 – 11.8
Flash Point: None (water solution)
Solubility in Water: Complete
Insoluble Matter: <0.5% wt
Freeze-Thaw: Stable
Density: 8.61 lbs/gal
VOCs: (10% Solution) <2%
Hazardous Components: Not Hazardous as defined in29 CFR 1910.1200(TFA Notes: this spec to be reviewed)
TPS-MT
High Efficiency Concentrate for Sanitary and Hard Water Scale Cleaning
Product Information
TPS-MT is a non-corrosive, non-flammable, non-toxic, biodegradable aqueous blend that quickly dissolves hard water scale, lime, rust, and other deposits formed by water, and provides excellent sanitary & hygienic cleaning benefits, for metals and tiles.
Provides excellent sanitary & hygienic cleaning benefits for metals and tiles
TPS-MT is a non-corrosive, non-flammable, non-toxic, biodegradable aqueous blend that quickly dissolves hard water scale, lime, rust, and other deposits formed by water, and provides excellent sanitary & hygienic cleaning benefits, for metals and tiles.
TPS-MT will not corrode or attack metal such as steel, iron, copper, lead, or titanium. It will not affect rubber, fiber, or other materials that may be found in water operated equipment. Metal surfaces not normally found in a water system, such as aluminum, chrome, or zinc, may become pitted or discolored if exposed TPS-MT in its pure form.
For Best Results
TPS-MT may be used as-is, or diluted with water, depending upon the application. It is designed for use at ambient temperatures and should not be used in equipment where temperatures may exceed 130° F or 54.4° C (use TPS-MT – Plus in these instances).
For best results, do not allow TPS-MT to set on surfaces for more than 4 hours without checking with the equipment manufactu
Handling Precautions:
TPS-MT should be used with adequate ventilation. Avoid contact with skin, eyes and clothing. If contact with eyes occurs, flush with copious amounts of water. Wash skin with soap and water.
Typical Physical Properties:
Physical Appearance: Light Straw-Colored Liquid
pH: < 2.0
Specific Gravity: 1.10
Density: 9.17 lbs/gal (or 1.1 kg/liter)
Freeze Point Approximately: -5° F (or -20.6° C)
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL USE ONLY.
Results on Bronze Artifact
Results on Stainless Sink
Results on Brass Sink Drain
Results on Porcelain Sink
Results on Brick Scale Buildup
